• Power fail supervision relay (form “C” contact rated 1 amp @ 28VDC). • Power supply is complete with enclosure, cam lock, transformer and battery leads. ALULM, ALULM and ALULM Data Sheet Rev. DSULMseries - I19E Overview Specifications. Overview: The ALULX is a power supply that converts a VAC, 60Hz input to a 12VDC or 24VDC regulating output (see specifications below). ALULM, ALULM (Fig. 1c, pg. 5) and ALULM (Fig. 2b, pg. 6) set desired DC output voltage by setting switch SW1 to the appropriate position on the power supply board. ALULM is 12VDC only. ALULM is 12VDC only.
Power Supply/Charger Overview: The Altronix ALUL-ADA Fire Alarm Indicating Circuit Power Supply/Charger is specifically designed to interface between the FACP and indicating devices to supply the additional power needed for a Fire Alarm System to conform to ADA regulations. For both retrofit and new installations, the model ALUL-ADA Fire. Power Supply/Charger Overview: The ALULM multi-output access control power supply/charger is specifically designed for use with access control systems and accessories. The ALULM converts a VAC / 60Hz input into five individually regulated 12VDC or 24VDC power limited outputs (see specifications). Each output will route power to a variety. • Power fail supervision relay (form "C" contact rated 1 amp @ 28VDC). • Power supply is complete with enclosure, cam lock, transformer and battery leads. ALULM, ALULM and ALULM Data Sheet Rev. DSULMseries - I19E Overview Specifications.
ALULM multi-output access control power supply/charger is specifically designed for use with access control systems and accessories. This unit converts a VAC / 60Hz input into five (5) individually protected Class 2 Rated power limited 12VDC or 24VDC outputs. ALULM multi-output access control power supply/charger is specifically designed for use with access control systems and accessories. This unit converts a VAC, 60Hz input into five (5) individually protected Class 2 Rated power limited 12VDC or 24VDC outputs. Each output will route power to a variety of access control hardware devices. ALULM, ALULM (Fig. 1c, pg. 5) and ALULM (Fig. 2b, pg. 6) set desired DC output voltage by setting switch SW1 to the appropriate position on the power supply board. ALULM is 12VDC only. ALULM is 12VDC only.
0コメント